11.5
~ 14.0 V for Vertical
16.0 ~ 19.0 V for Horizontal
Operating Temperature
-40ºC
~ +60ºC
Installing your Xtreme
II LNBF
Polarity is critical to
any linear LNBF.
If you have your
polarity set right you
will get the best
performance from your
LNBF. Good
polarity settings also
help you find signal
faster if you are
aligning the dish.
Below is some pictures
to help you understand
the polarity of the
Xtreme II LNBF.
Click any picture to get
a larger view.
Removing the cap lets
you see the probe and
how it aligns with the
polarity mark. Of
course removing the cap
breaks the water seal so
don't do this on your
LNBF.
The "0" polarity mark is
on the housing.
It's a lot easier to see
on the LNBF than in
these pictures.
If you don't know where
to set your polarity,
start by putting it up.
After you get signal go
back and align the
polarity for the best
signal. Don't
forget to check both
polarities. It's
always a good idea to
check your dish
alignment after making
polarity adjustments.
This is a Xtreme II on
one of our test dishes.
It's live on Intelsat 5
(Telstar 5) in Atlanta
Georgia.
Better view of the
polarity mark.
This is how it looks in
Atlanta Georgia.
Allow 5-7 Business Days for
Orders in Continental USA
