| Actuator
Replacment Help TIPS: Vonweise Actuators perform very well when used on a
tall pole installation attached to house since the motor is exceptionally quiet - Great
for roof mounts. Heavy duty actuators have the zert fitting at the bracket support
assembly. There are 2 main reasons for motor replacement: (1) Motor is turning but
the shaft is no longer moving - (stripped bushing) (2) Jammed or stalled actuator or
actuator error indication from receiver. 4dtv Actuator Install Hints:
If the bushing is gone on old motor, before replacing actuator, run the receiver all the
way to the east limit ( receiver memory) and then when you install new actuator, adjust
the first satellite chosen and perform align all in 4dtv menu. This should place
most all satellites at or near their receiver locations. |
