|
The 4dtv satellite receiver automatically stores most
satellites following proper installation
procedures. With the interactive program guide, which is updated daily, there
is no need to physically learn the operation of receiver, and enables those
that are less technically challenged equal opportunity to select their
programs. The built in real time clock lets you see at a glance and stay
current for program changes. One of the best features is the information or
info button on remote which displays a star rating, cast description, and a
much better definition, in comparison to the limited videocipher text cutoff
blocks. Favorite settings A and B for multiple users - The 4dtv digital
receiver is all setup for your HDTV channels and all you need is the HDD-200
decoder which converts your existing NTSC to High Definition
TV channels. Since
the downloaded (EPG -Electronic Program Guide) information is
done daily there is no need to reprogram satellite name changes, since
this is updated automatically. The channel delay when channel surfing
takes a little getting used to, since your old analog receivers are
quicker, but the quality of the picture is well worth the half second
wait. The digital picture quality is unsurpassed, and is quite
superior comparing all the small dish formats. This is probably due to
the fact that the digital picture bandwidth is much wider, providing an
overall better picture. The hookup is fairly straight forward, and most
all connections are explanatory other than the 2 large red and white
wires, (provides DC direction) which can be hooked up either way.
(comparing your old receiver) The simple test is to see which direction
the dish is moving when using the east or west buttons on remote, then
reversing if needed. (go back to same dish position before
reprogramming) I have provided a quick setup guide page which will
enable anyone to hookup the new receiver and provides step by step
programming procedures. Our support is unconditional. We are here to
help with your issues: |